Solve The Problem Of Leaking In Double Handled Faucet
Solving the problem of leaking in a two handle leaky faucet is not very difficult to do. But before you start the fixing, you need to check out that which of the faucet handle is actually leaking. After determining that, you need to shut off both the valves.
For repairing the leaky faucet, you should have lock pliers, a common screwdriver, a Philips screwdriver, needle nose pliers and a wrench.
Now to check that water is not flowing through both the handles, you can turn ON both the faucet handles. Now take out the cap cover that is on the top of the leaking faucet handle. After removal of cap, you will see a screw that is responsible for holding the faucet handle to the faucet valve stem. A Philips screwdriver could help you in removing that screw.
Once the screw and faucet handle has been removed, use channel lock pliers (or a wrench) to unscrew the nut that holds the faucet valve stem to the faucet. Now pull the valve stem out of the faucet using your needle nose pliers.
As you have successfully removed the faucet valve assembly, look for a rubber washer. With the help of a pair of needle nose pliers, pull out the rubber washer and spring from the valve stem housing. Many times this rubber washer/spring assembly gets worn out and causes the faucet to leak.
In case you do not find any rubber washer assembly as part of the valve assembly then you need to replace entire valve assembly. Therefore, visit any of the near by home improvement center and find out a replacement for either the washer/spring assembly or the entire valve assembly.
In order to re-assemble the faucet, put the rubber washer on top of the narrow end of the spring and then place it into the valve stem housing. Set it in a way that the wide end of the spring could rest at the base of the valve assembly housing. Then push the rubber washer onto the top of the spring and install the valve stem in the valve stem housing. Fasten it to the housing using the nut that you removed earlier.
Slide the faucet handle back onto the faucet valve stem and secure it with the Philips screw. Finally turn the hot and cold supply line valves back on and confirm the faucet leak has been fixed.
Scott Rodgers is a noted author who has been providing ample guidance on plumbing works all across the nation. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Fort Monmouth Plumbers (Need one?click here!) to Green Village Plumbers (Need one?click here!).
Tags: business, career, Gardening, home, home and garden, Home and Plumbing, home improvement, Home plumbing system, home repair, others, plumbers, plumbing issues, Plumbing Solutions
